erstellt am: 03.05.2013 Author: Fabian Frey Beschreibung: Der Düsendurchmesser wurde auf 0.32 (bei Verwendung einer 0.4mm-Düse) eingestellt um mehr Material zu extrudieren und dadurch geschlossene Deckflächen zu bekommen. Ausserdem wurde die Drucktemperatur auf 220°C angehoben um plugging zu vermeiden.

filament_diameter = 2.89 layer_height = 0.05 wall_thickness = 0.8 retraction_enable = True solid_layer_thickness = 0.8 fill_density = 100 print_speed = 100 print_temperature = 220 support = Everywhere enable_raft = False filament_density = 1.00 nozzle_size = 0.32 skirt_line_count = 1 skirt_gap = 3.0 retraction_min_travel = 5.0 retraction_speed = 40.0 retraction_amount = 4.5 retraction_extra = 0.0 travel_speed = 150 max_z_speed = 3.0 bottom_layer_speed = 20 cool_min_layer_time = 5 fan_enabled = True bottom_thickness = 0.3 object_sink = 0.0 enable_skin = False plugin_config = model_matrix = 1.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,-1.0 extra_base_wall_thickness = 0.0 cool_min_feedrate = 10 fan_layer = 1 fan_speed = 100 fan_speed_max = 100 raft_margin = 5 raft_base_material_amount = 100 raft_interface_material_amount = 100 support_rate = 80 support_distance = 0.5 infill_type = Line solid_top = True fill_overlap = 15 bridge_speed = 100 sequence = Loops > Perimeter > Infill force_first_layer_sequence = True joris = False retract_on_jumps_only = True hop_on_move = False print_bed_temperature = 54

[alterations] start.gcode = ;Sliced {filename} at: {day} {date} {time}

;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
G21        ;metric values
G90        ;absolute positioning
M107       ;start with the fan off
G28 X0 Y0  ;move X/Y to min endstops
G28 Z0     ;move Z to min endstops
G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
G92 E0                  ;zero the extruded length
G1 F200 E3              ;extrude 3mm of feed stock
G92 E0                  ;zero the extruded length again
G1 F{travel_speed}
M117 Printing...