AKK 3D Drucker

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.

============Cura Einstellungen===

====Profil: "Nubsi"===

erstellt am: 03.05.2013
Author: Fabian Frey
Beschreibung: Der Düsendurchmesser wurde auf 0.32 (bei Verwendung einer 0.4mm-Düse) eingestellt um mehr Material zu extrudieren und dadurch [[nicht_geschlossene_deckflaeche|geschlossene Deckflächen]] zu bekommen. Ausserdem wurde die Drucktemperatur auf 220°C angehoben um plugging zu vermeiden.

filament_diameter = 2.89
layer_height = 0.05
wall_thickness = 0.8
retraction_enable = True
solid_layer_thickness = 0.8
fill_density = 100
print_speed = 100
print_temperature = 220
support = Everywhere
enable_raft = False
filament_density = 1.00
nozzle_size = 0.32
skirt_line_count = 1
skirt_gap = 3.0
retraction_min_travel = 5.0
retraction_speed = 40.0
retraction_amount = 4.5
retraction_extra = 0.0
travel_speed = 150
max_z_speed = 3.0
bottom_layer_speed = 20
cool_min_layer_time = 5
fan_enabled = True
bottom_thickness = 0.3
object_sink = 0.0
enable_skin = False
plugin_config = 
model_matrix = 1.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,-1.0
extra_base_wall_thickness = 0.0
cool_min_feedrate = 10
fan_layer = 1
fan_speed = 100
fan_speed_max = 100
raft_margin = 5
raft_base_material_amount = 100
raft_interface_material_amount = 100
support_rate = 80
support_distance = 0.5
infill_type = Line
solid_top = True
fill_overlap = 15
bridge_speed = 100
sequence = Loops > Perimeter > Infill
force_first_layer_sequence = True
joris = False
retract_on_jumps_only = True
hop_on_move = False
print_bed_temperature = 54

[alterations]
start.gcode = ;Sliced {filename} at: {day} {date} {time}
	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
	;Print time: {print_time}
	;Filament used: {filament_amount}m {filament_weight}g
	;Filament cost: {filament_cost}
	G21        ;metric values
	G90        ;absolute positioning
	M107       ;start with the fan off
	G28 X0 Y0  ;move X/Y to min endstops
	G28 Z0     ;move Z to min endstops
	G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
	G92 E0                  ;zero the extruded length
	G1 F200 E3              ;extrude 3mm of feed stock
	G92 E0                  ;zero the extruded length again
	G1 F{travel_speed}
	M117 Printing...

AKK 3D Drucker

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Seiten-Werkzeuge